Browse all practice questions for the Building Tech Preboard Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Building Tech Preboard Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What distinguishes 'rich concrete' from other types of concrete?
  • What term describes overlapping design and construction phases to reduce project completion time?
  • What is the term for the opening through a parapet that allows water to drain from a flat roof?
  • Which type of brickwork consists entirely of headers and stretchers in alternating courses?
  • What is a common characteristic of anisotropic materials like wood?
  • Which paving type is known for its adaptability and is generally used in flexible paving?
  • Which type of truss has inclined web members forming a series of equilateral triangles?
  • What is typically the most critical factor to ensure quality in constructing concrete structures?
  • What type of rock is classified as igneous?
  • What is the process for preserving wood by impregnating it with creosote under pressure called?
  • In concrete proportioning, which characteristic uses the water-cement ratio as a measurement?
  • What term describes voids left in concrete due to ineffective mortar filling the spaces among coarse aggregates?
  • What does the term 'install' refer to in specification terms?
  • Which structural system primarily affects the lateral rigidity of a building framed with steel?
  • What is the primary function of roof underlayment?
  • How thick is double-strength glass?
  • Which of the following is a sedimentary rock?
  • What is calcium sulfate dihydrate more commonly known as?
  • What is the joint called that is used between two concrete placements when considering shrinkage?
  • What type of door operates by rolling up around a drum?
  • What do the visible rings in a cross section of a tree represent?
  • What does a rotary drill consisting of a steel-pipe drill stem with a roller-bit primarily do?
  • What is the main feature of a floor diaphragm in a building's structural system?
  • What type of paint material is most appropriate for G.I. sheet roofing?
  • What is the temporary formwork for an arch, dome, or vault called?
  • What process creates a hard, non-corrosive oxide film on metals, specifically aluminum?
  • What type of joints allow structural frames and exterior cladding to move independently?
  • Which paving system is classified as flexible paving?
  • What construction method involves building multistory site-cast concrete walls with forms that rise as construction continues?
  • What is the water absorption classification for vitreous ceramic tiles?
  • Which of the following does NOT classify as a type of joint for window installation?
  • What characteristic does urea formaldehyde resin (UF) primarily lack compared to other adhesives?
  • Which type of flooring is specifically designed for use in fitness centers?
  • What is the primary purpose of a rolling door in a structure?
  • Which of the following is an insulating glass unit (IGU)?
  • What is the term used for placing the last structural element in a building frame?
  • What is the term for plaster that is devoid of sand?
  • What term describes a short rafter that supports a rake overhang?
  • What is white rust primarily associated with?
  • Which process describes forming brick and structural tile by extruding plastic clay?
  • Which type of hinge is recommended for installation between a kitchen and dining area?
  • What type of wood is formulated to resist moisture and prevent decay?
  • What does SPT stand for in geotechnical testing?
  • Which of the following materials is not classified as bituminous?
  • Where should temperature and shrinkage reinforcement be positioned in a slab-on-grade to avoid cracks?
  • What is a major benefit of prefabricated flying forms in construction?
  • What is a voussoir in masonry construction?
  • What type of ceiling is designed to support workers safely during installation and maintenance of systems above?
  • What is the general term for a slab that is not a slab-on-grade?
  • What construction technique involves conveying concrete or mortar through a hose and projecting it at high velocity onto a surface?
  • Which of the following does not constitute the types of basement wall structures?
  • What is a twisting force referred to in structural terms?
  • In the context of construction, what is the role of a geotechnical engineer primarily focused on?
  • This type of drill is powered by compressed air or hydraulic fluid and breaks rock into small particles by impact. What is it called?
  • What are individual pieces of glass commonly known as?
  • What is the function of an impact wrench?
  • Which of these materials swells when exposed to heat and is used in passive fire protection systems?
  • In construction, what is the primary purpose of a voussoir?
  • Which building technique is considered the simplest?
  • What does the term "topping out" signify in the construction process?
  • What type of beam, when loaded without lateral bracing, fails by buckling rather than in flexure?
  • What is a checkered plate primarily used for?
  • What does the term "grading" refer to in construction?
  • What kind of door consists of interlocking metal slats controlled by a track and coiling overhead?
  • If a concrete cylinder test shows a strength of 1,400 psi at test time, what is its expected compressive strength?
  • What is the primary purpose of using scaffolding in construction?
  • Who is responsible for producing the shop and erection drawings in structural steel construction?
  • What is the term for steel shapes such as angles, channels, and flats used in construction?
  • Using a jackhammer falls under which type of drilling?
  • Which type of stone is classified by ASTM as not being part of the first four groups of dimension stone?
  • What type of plaster is made exclusively from cement and lacks additional aggregates?
  • How does the integrity of a concrete slab-on-grade primarily get evaluated?
  • Which stone is classified as part of the first group of dimension stone?
  • Who is responsible for conducting soil tests in construction?
  • What phrase is used in specifications when limited alternatives are available to the Contractor?
  • What is the term used for the act of excavating or filling earth in preparation for a finish surface like paving?
  • When a Contractor has an option in a specification, which word is typically used?
  • What is the significance of intumescent materials in fire safety?
  • Which joint is typically used to install glass into a frame of a French window?
  • What characteristic of honeycomb concrete can lead to reduced material strength?
  • What term describes the process of removing concrete forms from cured concrete?
  • What is the purpose of a vapor barrier in building construction?
  • What is concrete called that incorporates large stones, each weighing 50kg or more?
  • In lighting design, what is the primary benefit of positioning downlights at 1/3 the height of the room from the wall?
  • Which projection shows a three-dimensional object with two principal axes foreshortened?
  • What structural element is primarily intended to resist lateral forces in columns?
  • What word is used in specifications that involve informational statements about the Owner?
  • Which term describes the visual characteristic of wood?
  • What term best describes the relationship between tasks in a critical path analysis?
  • What term describes the initial expense involved in construction?
  • What is the name of the drill designed for obtaining samples of rock from a hole, usually for exploratory purposes?
  • What process is indicated by the abbreviation SPT in soil testing?
  • What is defined as metal with a maximum width of 0.005 inches?
  • Which of the following terms describes a type of timber column that is made by gluing layers of wood together?
  • Which term describes a structural element that ties together multiple frames in construction?
  • What is created by a joint formed when a concrete surface hardens before another batch is applied?
  • When dealing with complex roofing geometries like hyperbolic paraboloid shells, which roofing membrane approach is best chosen?
  • Which engineered wood product is known for having high resistance to bending?
  • What term refers to the management of transporting excavated materials in large-scale projects?
  • What is the minimum duration for which records of test conduction must be preserved for inspection after project completion?
  • What does the term 'Pise' refer to in construction?
  • What is the vertical bar found between adjacent window or door units called?
  • When building with concrete, which joint type is most appropriate for accommodating shrinkage?
  • In construction specifications, what operative word indicates a mandatory action by the Contractor?
  • What do you call a column feature that projects from a corner of a building?
  • What type of reinforcement system consists of bands of bars in flat-slab construction?
  • How thick is single-strength glass?
  • What is the simplest unit of a space frame, containing only six structural members?
  • What term describes properties that remain consistent regardless of the direction measured?
  • What quality of concrete is primarily determined by the ratio of water to cement?
  • Which of the following is a tinted glass?
  • What is the name of the layer of weak material derived from cementitious material and aggregate fines that accumulates on the surface of concrete?
  • Which of the following is NOT a purpose of fibrous admixtures?
  • How many times greater is the compressive strength of steel reinforcement compared to normal-strength concrete?
  • When a product is specific and has a registered trademark, how is it described?
  • What is NOT typically associated with a composite deck?
  • Which type of wood is recognized as fire-retardant wood?
  • What is the vernacular term used for a purlin?
  • What does a rammed earth wall consist of?
  • What term refers to large prefabricated units of formwork incorporating supports, designed to be moved from place to place?
  • What is the vernacular term for a vertical stud?
  • Which drill utilizes a hardened, rotating bit to grind through rock?
  • Which term describes a support column that is primarily affected by compression rather than shear?
  • What does lumber specification S4S indicate?
  • What is a composite structural material that includes thin sections of cement mortar and closely spaced layers of steel wire mesh?
  • What type of column's load capacity is limited due to buckling?
  • In which type of roofing system is thermal and moisture protection primarily provided by underlayment?
  • What is the purpose of a drip groove and/or capillary break at the bottom of a window sash?
  • In project specifications, what is often emphasized for the Contractor when conditions are mandatory?
  • What is the purpose of double glazing in architectural design?
  • Under which group does Travertine fall according to ASTM classifications?
  • What continuous support is typically used for bars in the bottom of slabs?
  • Which method would be least effective for ensuring lumber has seasoned quality?
  • Which type of truss has vertical web members in tension and diagonal members in compression?
  • A glue-laminated (Glulam) timber column is known to be what type of column?
  • What is the recommended method for assessing a soil-support system's load bearing capacity?
  • What is dimension lumber primarily used for?
  • According to BP 344, which feature is not required to be accessible?
  • Which welding process is commonly referred to as "stick" welding?
  • Which material is typically associated with the stiff-mud process in brick making?
  • Which type of lockset is not suitable for installation on the edge of a door?
  • In building terminology, what does a cold joint indicate?
  • Which concrete system features a slab supported by and often monolithic with reinforced concrete beams?
  • What is the most common material used as an interlayer in laminated glass?
  • Concrete culverts, pipes, and poles belong to which category of concrete?
  • Diaphragm action in structures is characterized by the stiffness of which material feature?
  • What is the name of a flat steel plate used to connect the members of a truss?
  • What is a key feature of a stick system curtain wall?
  • What is an essential characteristic of a slender beam?
  • For optimal direct illumination using downlights, what should be the distance of light fixtures from the wall?
  • What is the term for a beam that runs along a building's exterior edge?
  • What does whitetopping refer to in construction?
  • Which material is considered not a semi-finished steel product?
  • What is the term for a door type where the doorknob is positioned on the left and the door swings outward?
  • For sealed windows requiring significant noise reduction, which type of glazing is most effective?
  • In construction terminology, what does 'centering' refer to?
  • How is dressed lumber typically characterized?
  • What is the name of the vertical framing member in a panel door?
  • What is the primary purpose of fibrous admixtures in concrete mix?
  • Which type of adhesive for engineered wood shows the least resistance to water?
  • Beside corrosion resistance, what is the second most important benefit that stainless steel offers?
  • What is the initial investigation method that should be used before designing a foundation for a building larger than a typical residential house?
  • What is the Filipino term used to describe a rabbet?
  • Which kind of shrinkage in logs is considered to be the most pronounced?
  • Which of the following devices is used for hoisting building materials with a rope or cable?
  • What common wood preservative is typically used for furniture?
  • Which of the following describes tunnel forms in construction?
  • In project management, what do we call actions that are scheduled to occur simultaneously?
  • What is the standard size overlap for corrugated G.I. roofing?
  • Which of the following is not a fire-rated glass?
  • What is the difference in dimensions for lumber classified as nominal compared to its actual size for pieces measuring 8 inches or more?
  • What piece of steel is embedded in concrete to help a beam act as a single structural unit?
  • What does the abbreviation HSS refer to in construction terms?
  • What is the purpose of a set screw?
  • What is a commonly used name for synthetic stucco?
  • Which of the following best describes the tipping activity in construction site management?
  • Which metal is the main component in the production of glass mirrors?
  • Which of the following stones is categorized under the second group of dimension stone by ASTM?
  • What is the term for the fire-resistant material used to retard the passage of fire between a curtain wall and spandrel beam?
  • What type of roofing tile is approximately semi-cylindrical in shape and laid in courses?
  • Which of the following floors would require the highest quality of levelness and flatness?
  • Which of the following is a metamorphic rock?
  • What type of decking serves as permanent formwork for a reinforced concrete deck?
  • In the context of structural conceptualization, which of the following is not a factor considered?
  • What is the vernacular term for earthfill used in construction?
  • What characteristic defines a Howe truss compared to a Pratt truss?
  • What type of bond features alternating patterns of headers and stretchers in each course?
  • Which type of glass offers the least noise reduction?
  • Which of the following is not considered a high-range sealant?
  • What is a rowlock brick?
  • What part of a joint are the members closest to each other where welding occurs referred to as?
  • What feature distinguishes a mezzanine from other building floors?
  • Which curtain wall panel is most appropriate for a high-rise residential building?
  • Wood typically expands when what condition increases?
  • What is the failure mode of retaining walls where the top portion of the wall slides first?
  • What type of forming system is used to create walls and slabs in a single operation for high-rise projects?
  • Which device is primarily used in construction to raise and lower heavy loads?
  • What kind of activity flow permits multiple activities to be performed at the same time?
  • What is the name of a high-speed rotary shaping hand power tool used for smooth cutting and curving on solid wood?
  • What material is inserted to control the spread of fire in a construction space?
  • What is the vernacular term for a joist?
  • Which type of roofing has the advantage of being lightweight and easy to install?
  • What type of concrete contains less portland cement paste than typical concrete?
  • What term describes concrete that is resistant to high temperatures?
  • Which of the following materials is commonly used as insulation in residential construction?
  • Which architectural feature refers to a low or partial story that projects as a balcony?
  • What is a curtain wall system that is mostly assembled on-site called?
  • What characterizes summerwood in trees?
  • Which word indicates a choice in construction specifications with limited options available?
  • What is the main ingredient used to make glass?
  • Which piece of equipment is capable of both excavation and finishing work?
  • Which tool or instrument is used to check both vertical and horizontal lines?
  • Which type of truss features vertical web members in compression and diagonal members in tension?
  • What is a tall, narrow window located alongside a door commonly called?
  • What type of reinforcement is typically applied to ties, hoops, and spirals in columns?
  • What is the bond type used in brickwork with alternating headers and stretchers?
  • What is the term for the lateral deflection of a structure?
  • Which of the following materials is not classified as dimension lumber?
  • What type of activity flow requires the completion of one task before another begins?
  • Which ingredient among paints is considered volatile?
  • Which stone is part of the third group of dimension stone?
  • Which sawing method produces the least distortion in lumber due to shrinkage?
  • Which of the following roofing systems typically requires the least maintenance?
  • What common issue does lateral reinforcement in columns aim to address?
  • In structural lumber classifications, which option is recognized as structural lumber?
  • What is the primary purpose of roof sheathing?
  • What is the main focus of the concept "structural conceptualization"?
  • Which classification of ceramic tile reflects low water absorption?
  • What is a folded plate structure designed for?
  • Which of the following stones belongs to the fourth group of dimension stone?
  • What is the term for activities that can start without waiting for preceding tasks to be completed?
  • What type of prefabricated panel is formed by attaching two thin facings to a thicker core?
  • Which type of masonry wall connects to a structural frame like wood or metal stud walls?
  • What aspect of construction does the "float process" pertain to?
  • What structural feature is integrated within sandwich panels for insulation purposes?
  • What type of machine is designed to lift itself as a building rises?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy